GTO Gate Operators and Accessories
PRO-SW4000XLS
– Swing Gate operator.
– Gates up to 20ft long and 1000lbs per leaf.
– Can function with dual gates with the addition of a PRO-SW4200XLS.
– Improved operating speed: 15-20 seconds.
– Heavy-duty hardware.
– Easy transmitter programming.
– Battery backup.
– Hardware for a post mounted installation.
– Sealed rechargeable battery. Can be solar powered.
PRO-SW3000XLS
– Swing Gate operator.
– Gates up to 16ft long and 650lbs per leaf.
– Can function with dual gates with the addition of a PRO-SW4200XLS.
– Improved operating speed: 15-20 seconds.
– Operating temperature range: -5 F to +160 F.
– Easy transmitter programming.
– Improved front mount and scraper seal design.
– Hardware for a post mounted installation.
– Sealed rechargeable battery. Can be solar powered.
PRO-SW2000XLS
– Swing Gate operator.
– Gates up to 16ft long OR 500lbs per leaf.
– Can function with dual gates with the addition of a PRO-SW2002XLS.
– Larger, higher powered, lower RPM motor.
– Improved wind load operation.
– Reduced gear motor noise.
– Range of arm stroke: up to 15″ (38cm).
– New controller with Jog button for easy limit setting.
– Improved front mount and scraper seal design.
GPX-SL25
– Slide gate operator
– For gates up to 24ft long and 650lbs with a 20ft opening.
– Heavy-duty control board.
– Adjustable obstruction sensing.
– Automatic close settings (0-120 seconds).
– Built-in internal friction disk brake and lock.
– Chain disconnects for manual gate opening.
– Light residential cycle rated for 100 cycles daily.
– Opens at a speed of 1 foot a second.
PRO-SL2000B
– Slide gate operator
– For gates up to 30ft long and 1000lbs with a 20ft opening.
– Heavy-duty control board with gate sequencing.
– Adjustable obstruction sensing.
– Automatic close settings (0-120 seconds).
– Built-in internal friction disk brake and lock.
– Chain disconnects for manual gate opening.
– Includes 4ft post mounts.
– Opens at a speed of 1 foot a second.
GP-SW50
– Swing gate operator
– For gates up to 16ft long and 650lbs per leaf.
– Dual gate operating requires second operator.
– Maintenance-free, 24V brushless DC motor.
– 1200-1 direct word gear with totally enclosed gear reduction.
– 100% solid-state motor controls circuitry.
– Heavy-Duty, weatherproof steel chassis.
– Uses two 12 V DC batteries
– Visible LED and audible diagnostic indicators.
GP-SL50
– Slide gate operator
– For gates up to 32ft long and 800lbs with a 27ft opening.
– Dual gate operating requires second operator.
– Maintenance-free, 24V brushless DC motor.
– 25-1 direct word gear with totally enclosed gear reduction.
– Non back-drive gearbox with ball bearing output shaft.
– Heavy-Duty, weatherproof steel chassis.
– Uses two 12 V DC batteries
– Visible LED and audible diagnostic indicators.
GTO Gate Accessories
Ask about installing a solar power system for your gate operator!
Entry Transmitters
– 1, 2, and 3 button options.
– Adjustable code settings.
– 2 and 3 button transmitters require the Universal Receiver to operate garage door openers.
Universal Receiver
– Converts garage door openers to work with GTO transmitters.
– Up to 100ft range
– Weather-resistant housing.
-2 independent relay outputs (dry contact).
25-Code Digital Keypad
– Program up to 25 entry codes.
– Temporary codes can be programmed to expire within 1-7 days.
– Compatible with the gooseneck pedestal.
Residential Wireless Entry Intercom
– Crystal-clear two-way wireless communication up to 500ft.
– One base station with rechargeable battery.
– Program up to 100 entry codes.
– Proximity detection backlit keypad with stainless steel faceplate and locked housing.
Gooseneck Pedestal
– Mount for access control devices for your gate automation system.
– Rust-proof extruded aluminum construction.
– Black powder coated finish.
Pin Lock
– Use with the PRO-SW4000XLS/PRO-SW-3000XLS/PRO-SW2000XLS Series or the PRO-SL2000B/GPX-SL25 Series, to prevent theft of the opener or manual opening.
Automatic Gate Lock
– The #1 accessory for swing gate operators
– Automatically locks and unlocks when the gate opens and closes.
– Perfect for high winds or security.
– Proven to withstand up to 3500lbs of force.
– Stabilizes and secures the leading edge of a gate leaf.
Driveway Vehicle Sensor
– Electromagnetic sensor detects vehicles.
– Automatically activates gate operator when a vehicle exits the property.
– Ideal for solar application.
Column Mount Lock Reciever
– For use with Automatic Gate Lock or Bulldog Pedestrian Gate Lock, when mounting on a column or with limited space.
Push Button Control
– Simple wiring for up to 1000ft.
– Provides open/close/stop operation as simply as possible.
Contact Us!
Wireless Vehicle Sensor
-Automatically activates gate operator when a vehicle exits the property
– Compatible with all automatic gate openers.
– 1-3 year battery life.
Magnetic Gate Lock
– Heavy-duty magnetic lock for vehicular swing gates.
– 1200lbs of holding force
– Designed to mount vertical or horizontal.
– Accepts 12v DC or 24V DC voltage input.
Bulldog Pedestrian Gate Lock
– Ideal for securing pools, tennis courts, docks, etc.
– Integrates into existing security systems (card readers, keypads, phone entry system).
– Program up to 25 codes.
– Housing proven to withstand up to 3500lbs of force.
– Fail secure system with manual keyed override release.
Wireless Driveway Alarm
– Alerts you of vehicles entering or exiting your driveway.
– Functional range up to 400ft.
– Only detects vehicles by using electromagnetic technology.
– Indoor receiver included.
Push to Open Brackets
– Required when an operator mush push a gate open, such as away from a sloping driveway or when space constrains the gate from opening into a property.
– Two brackets required for dual swing gate installation.
Photo Beams
– A non-contact means of entrapment protection.
– More reliable than retro reflective photo beam systems
– Universal mounting to any solid surface.
Mounting Hardware
– Mounts the GPX-SL25 to an existing concrete pad or other mounting surface.
– Post mount adapter plate available in 30, 48, or 60 inches in length.
– Mounts the DC Slide operators SL2000B/SL2200B to a concrete pad.